Kärcher submersible waste water pump SP 9.500 Dirt

66 Points

ID: 80399

With a maximum pumping capacity of 9,500 l/h, the SP 9.500 Dirt is the perfect entry-level model for quickly pumping out or pumping over rain barrels and garden ponds
It reliably pumps clean and dirty water with dirt particles up to 20 millimetres in size. For heavier soiling, an optional pre-filter can be attached to protect the pump impeller from clogging, for example by branches (not included)
The mechanical seal known from the professional sector and installed in all submersible pumps guarantees an extra-long service life of the pump here too
The submersible waste water pump is also equipped with a float switch that switches the device on and off depending on the water level, thereby preventing it from running dry. And thanks to the option of fixing the float switch, the pump can also be operated at low water levels down to a residual water height of 25 millimetres
Another practical feature: the Quick Connect connection piece enables particularly quick and easy connection of 1", 1 1/4" and 1 1/2" hoses
Comfortable carrying handle
Easy hose connection thanks to Quick Connect
Manual/automatic mode changeover: float can be fixed in place
Float switch
In automatic mode (auto), the pump switches automatically with the water level
In manual mode, the pump runs continuously to reach the minimum residual water level
Ceramic mechanical seal
Motor power: max. 280 watts
Flow rate: max. < 9500 l/h
Delivery temperature: max. 35 °C
Delivery head: 6 m
Pressure: max. 0.6 bar
Grain size: max. 20 mm
Immersion depth: max. 7 m
Min. residual water, manual: 25 mm
Residual water height: 25 mm
Connection thread: G1 1/2
Connection thread on pressure side: G1 1/2 female thread
Connection cable: approx. 10 m
Voltage: 230 - 240 V
Frequency: 50 Hz
Weight without accessories: approx. 3.8 kg
Dimensions: approx. 229 x 238 x 303 mm (LxWxH)
Scope of delivery: Hose connection piece: G1, 1", 1 1/4", 1 1/2"